>
> You can also check with the following solutions from Metalink:
>
> SOLUTION DESCRIPTION:
> >
> Objects in the margin region are restarted on every physical page. As a
> result, not all print condition types make sense for margin objects.
> Because
> objects are restarted on every page, it is as if you are always on the
> first
>
> page of the object.
>
> The print condition FIRST is the same as the print condition ALL.
>
> The print conditions LAST and ALL BUT LAST are invalid because "LAST" is
> never
> reached.
>
> The print condition ALL BUT FIRST causes the object to never appear
> because
> the object never goes beyond "FIRST" page.
>
> Thus, the only valid print conditions for the object are FIRST and ALL.
>
>
> **************************************************************************************
>
> *How to create a Reports with a frame displayed only at the bottom of
> the last page.*
> --------------------------------------------------------------------
>
> To display a frame only on the last page of a "repeating frame" the
> properties "Print Object On" and "Base Printing On" must be used.
>
> The frame to be displayed only on the last page should be anchored to the
> repeating frame and the properties "Print Object On" and "Base Printing
> On"
> should be set like this:
>
>
> Print Object On : Last Page
> Base Printing On : Anchoring Object
>
>
> The frame to be displayed only on the last page should NOT be included
> in the frame it is anchored to, else an error :
>
> REP-1216 : xxx has an illegal print condition
> Hope this info will help you....
>

1.出现框的距离大一点
2.正确分组，然后 选择 Base Print On: Anchoring Object

而且使用此方法选择item框可以在文本显示中可以保持换页面的时候没有空行