关于failover
The FAILOVER_MODE parameter must be included in the CONNECT_DATA section of a
connect descriptor. FAILOVER_MODE can contain the parameters described in Table 13–4.
Table 13–4 Additional Parameters of the FAILOVER_MODE Parameter
example:
prod =
(FAILOVER=on)
(LOAD_BALANCE=on)
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.137.250)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = jssj)
(FAILOVER_MODE=
(TYPE=select)
(METHOD=basic)
(RETRIES=20)
(DELAY=15)
)
)
)
connect descriptor. FAILOVER_MODE can contain the parameters described in Table 13–4.
Table 13–4 Additional Parameters of the FAILOVER_MODE Parameter
example:
prod =
(FAILOVER=on)
(LOAD_BALANCE=on)
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.137.250)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = jssj)
(FAILOVER_MODE=
(TYPE=select)
(METHOD=basic)
(RETRIES=20)
(DELAY=15)
)
)
)
来自 “ ITPUB博客 ” ，链接：https://blog.itpub.net/29802484/viewspace-2055528/ ，如需转载，请注明出处，否则将追究法律责任。
请登录后发表评论
登录
全部评论
