硬件需求：

Memory Requirements

Minimum: 1 GB of RAM

Recommended: 2 GB of RAM or more

[root@centos-fuwenchao ~]# grep MemTotal /proc/meminfo
MemTotal:        1914688 kB
[root@centos-fuwenchao ~]#

[root@centos-fuwenchao ~]# grep SwapTotal /proc/meminfo
SwapTotal:       2095096 kB
[root@centos-fuwenchao ~]#

System Architecture

[root@centos-fuwenchao mntsda3]# uname -m
x86_64
[root@centos-fuwenchao mntsda3]#

The following tables describe the disk space requirements for software files and data files for each installation type on Linux x86-64:

To determine the distribution and version of Linux installed, enter the following command:

[root@centos-fuwenchao tmp]# cat /proc/version
Linux version 2.6.32-358.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Fri Feb 22 00:31:26 UTC 2013
[root@centos-fuwenchao tmp]# lsb_release -id
Distributor ID: CentOS
Description:    CentOS release 6.4 (Final)
[root@centos-fuwenchao tmp]# lsb_release -r
Release:        6.4
[root@centos-fuwenchao tmp]# lsb_release -a
LSB Version:    :base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch
Distributor ID: CentOS
Description:    CentOS release 6.4 (Final)
Release:        6.4
Codename:       Final

2.7 Verifying UDP and TCP Kernel Parameters

Set TCP/IP ephemeral port range parameters to provide enough ephemeral ports for the anticipated server workload. Ensure that the lower range is set to at least 9000 or higher, to avoid Well Known ports, and to avoid ports in the Registered Ports range commonly used by Oracle and other server ports. Set the port range high enough to avoid reserved ports for any applications you may intend to use. If the lower value of the range you have is greater than 9000, and the range is large enough for your anticipated workload, then you can ignore OUI warnings regarding the ephemeral port range.

For example, with IPv4, use the following command to check your current range for ephemeral ports:

$ cat /proc/sys/net/ipv4/ip_local_port_range
32768 61000

In the preceding example, the lowest port (32768) and the highest port (61000) are set to the default range.

If necessary, update the UDP and TCP ephemeral port range to a range high enough for anticipated system workloads, and to ensure that the ephemeral port range starts at 9000 and above. For example:

# echo 9000 65500 > /proc/sys/net/ipv4/ip_local_port_range

Oracle recommends that you make these settings permanent. For example, as root, use a text editor to open /etc/sysctl.conf, and add or change to the following: net.ipv4.ip_local_port_range = 9000 65500, and then restart the network (# /etc/rc.d/init.d/network restart). Refer to your Linux distribution system administration documentation for detailed information about how to automate this ephemeral port range alteration on system restarts.

Oracle Base Directory

The Oracle base directory is a top-level directory for Oracle software installations. The Optimal Flexible Architecture (OFA) guidelines recommend that you use a path similar to the following for the Oracle base directory:

/mount_point/app/software_owner

/u01/app/oracle
/u01/app/orauser

Oracle Inventory Directory

The Oracle Inventory directory (oraInventory) stores an inventory of all software installed on the system. It is required and shared by all Oracle software installations on a single system. If you have an existing Oracle Inventory path, then Oracle Universal Installer continues to use that Oracle Inventory.

Oracle Home Directory

The Oracle home directory is the directory where you install the software for a particular Oracle product. You must install different Oracle products or different releases of the same Oracle product in separate Oracle home directories. When you run Oracle Universal Installer, it prompts you to specify the path to this directory and a name that identifies it. In accordance with the OFA guidelines, Oracle strongly recommends that the Oracle home directory you specify is a subdirectory of the Oracle base directory for the user account performing the installation. Oracle recommends that you specify a path similar to the following for the Oracle home directory:

oracle_base/product/11.1.0/dbhome_1
oracle_base/product/11.2.0/dbhome_1
oracle_base/product/11.2.0/grid

增加用户和组：

[root@centos-fuwenchao CentOS_6.4_Final]# groupadd oinstall
[root@centos-fuwenchao CentOS_6.4_Final]# groupadd dba
[root@centos-fuwenchao CentOS_6.4_Final]# useradd -g oinstall -G dba oracle
[root@centos-fuwenchao CentOS_6.4_Final]#

调剂内核参数：xiang见民方文档

[root@centos-fuwenchao u01]# vi /etc/sysctl.conf
     40 kernel.shmall = 4294967296
     41 fs.aio-max-nr = 1048576
     42 fs.file-max = 6815744
     43 kernel.shmall = 2097152
     44 kernel.shmmax = 4294967295
     45 kernel.shmmni = 4096
     46 kernel.sem = 250 32000 100 128
     47 net.ipv4.ip_local_port_range = 9000 65500
     48 net.core.rmem_default = 262144
     49 net.core.rmem_max = 4194304
     50 net.core.wmem_default = 262144
     51 net.core.wmem_max = 1048576
[root@centos-fuwenchao u01]# sysctl -p

修改体系资源限定(正在root帐号下把持)：

编辑体系资源限定建立文件 vi /etc/security/limits.conf，正在该文件下添加以下止：

编辑文件 vi /etc/pam.d/login，添加以下止(11gR1有要求，R2没有要求)：

编辑 vi /etc/profile 文件，添加以下止(11gR1有要求，R2没有要求)：

该建立正在用户oracle登录时会立即死效，假如当前 oracle 用户曾登录可退出后从头登录使之死效。

关闭SELinux(正在root帐号下把持)：

编辑SELinux建立文件 vi /etc/selinux/config，将SELINUX的值设为 disabled，以下：

修改该文件可使重启体系后没有启动SELinux。关闭当前已开启的SELinux操纵以下饬令：

修改/etc/hosts文件(正在root帐号下把持)：

编辑文件 vi /etc/hosts，添加一止：

[root@centos-fuwenchao u01]# more /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
10.13.2.115 centos-fuwenchao  node1
10.13.2.116 centos2-fuwenchao  node2
[root@centos-fuwenchao u01]#

若没有进止此把持会正在安拆时弹出警告，并且可以或许影响监听次序的正常运转，所以建议做这个修改。

Creating an Oracle Base Directory

Before you create an Oracle base directory, you must identify an appropriate file system with sufficient free disk space.

To identify an appropriate file system:

1. To determine the free disk space on each mounted file system, use the following command:

   # df -h
   

2. From the display, identify a file system that has the appropriate amount of free space.

   The file system that you identify can be a local file system, a cluster file system, or an NFS file system on a certified NAS device.

3. Note the name of the mount point directory for the file system that you identified.

To create the Oracle base directory and specify the correct owner, group, and permissions for it:

1. Enter commands similar to the following to create the recommended subdirectories in the mount point directory that you identified and set the appropriate owner, group, and permissions on them:

   # mkdir -p /mount_point/app/oracle_sw_owner
   # chown -R oracle:oinstall /mount_point/app/oracle_sw_owner
   # chmod -R 775 /mount_point/app/oracle_sw_owner
   

   For example:

   # mkdir -p /u01/app/oracle
   # chown -R oracle:oinstall /u01/app/oracle
   # chmod -R 775 /u01/app/oracle
   

2. When you configure the oracle user"s environment later in this chapter, set the ORACLE_BASE environment variable to specify the Oracle base directory that you created.

设置Oracle环境变量

[root@centos-fuwenchao security]# su - oracle
[oracle@centos-fuwenchao ~]$ vi .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
        . ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
export ORACLE_SID=orawen
export NLS_LANG=american_america.zhs16gbk

-------起头安拆

[root@centos-fuwenchao oraapp]# ll
total 2227316
drwxr-xr-x. 8 root root       4096 Aug 19  2009 database
-rw-r--r--. 1 root root 1285396902 Aug 26 23:16 linux_11gR2_database_1of2.zip
-rw-r--r--. 1 root root  995359177 Aug 26 23:33 linux_11gR2_database_2of2.zip
[root@centos-fuwenchao oraapp]# pwd
/u01/oraapp
[root@centos-fuwenchao oraapp]#

--

[root@centos-fuwenchao oraapp]# unzip linux_11gR2_database_1of2.zip
[root@centos-fuwenchao oraapp]# unzip linux_11gR2_database_2of2.zip

死成database目次

参考：

http://www.liusuping.com/ubuntu-linux/redhat-linux-oracle-11g-r2.html

http://zhoujingxian.iteye.com/blog/1199166

http://blog.itrunc.com/2013/12/30/install-oracle-11g-release2-in-centos-x64/

Oracle民方文档

本文出自 “从运维到ETL” 博客，请务必保存此出处http://fuwenchao.blog.51cto.com/6008712/1360149