MT6179 RF Design Notice
▪ MT6179 vs. MT6176
▪ MT6179 function block
▪ 92 MD feature and support limit
▪ LTE CA overview
▪ MT6179 reference circuit
▪ eLNA application guide
▪ MT679x (BB)/MT6355 (PMIC)’s connection for MT6179
▪ MT6179 RF power/CLK/control diagram
▪ MT6179 RF layout guide
▪ MT6303(ET) layout guide on AP side.
▪ MT6179 RF reference layout
MT6179 Function Block
MT6179 Transceiver RF Overview
MT6179 Transceiver Supported Band
MT6179 LNA Mapping
http://bbs.16rd.com/thread-459336-1-1.html
PRx + DRx: 24+24 ports
-- LB: <1GHz. L/MB:<1G, 1.45~2.2GHz. MB/HB:1.8~2.7GHz.
-- UHB: 2.3-2.7 3.4-3.8GHz. UNII: 5.2~5.9GHz.
-- Supports 2G SAWless (B2,3,5,8) and TDS/LTETDD SAWless(B34,B39)
MT6179 RX port allocation for global SKU
Please follow the rule if you want to change LNA port:
• Bands only support non-CA: follow LNA frequency range
• Bands with CA: intra-group changeable
• PRX & DRX MUST be in the same LNA Group
RX band/port assignment, Global SKU, no eLNA :
RX band/port assignment, Global SKU, DRX with eLNA:
Note for UHB Usage
Avoid to place the UHB signal in adjacent ports
·································
来自 “ ITPUB博客 ” ，链接：https://blog.itpub.net/31529038/viewspace-2219032/ ，如需转载，请注明出处，否则将追究法律责任。
