Copper ore belt conveyor in the course of operation should pay attention to matters in Indonesia

Copper ore belt conveyor belt conveyor is short, a fixed and mobile, simple structure, high efficiency. Flexible conveyor belt for material handling and traction components of the continuous delivery machinery. An endless conveyor belt surrounds the drive roller and the reversing roller. The upper and lower branches between the rollers are each supported by a plurality of rollers. The material placed on the upper branch, the use of drive rollers and the friction between the belt traction conveyor and material operation. Suitable for horizontal and inclined transport of bulk materials and pieces of goods, can also be used for a certain process operation of the assembly line. Simple structure, stable and reliable work, strong adaptability to materials, large transmission capacity, low power consumption and wide application.

Copper ore belt conveyor operation process

1, the fixed conveyor should be installed in accordance with the provisions of the fixed installation on the basis. Mobile conveyor should be used before the formal operation of the wheel wedge wedge or with a brake brake. So as not to move around the work, there are multiple parallel operation of the conveyor, the machine and the machine between the machine and the wall should be one meter of the channel.

2, copper ore belt machine before use to check the operation of the part, tape buckle and bearing device is normal, protective equipment is complete. Tape tension should be adjusted to the appropriate level before starting.

3, belt conveyor should be no-load start. And other normal operation before feeding. It is forbidden to drive the vehicle first.

4, there are several sets of conveyor running in series, should start from the discharge end, start in sequence. All the normal operation, before feeding.

5, run the tape deviation phenomenon should stop adjustment, not forced to use, so as not to wear the edge and increase the load.

6, the working environment and be sent to the material temperature shall not be higher than 50 ℃ and lower than -10 ℃.

7, the conveyor belt to prohibit pedestrians or by people.

8, stop before entering the feed must be stopped, and other materials on the belt before unloading to stop.

9, copper ore belt motor must be well insulated motor. Do not pull and drag the mobile conveyor cables. The motor should be grounded reliably.

10, when the belt is slipping hand to pull the belt, so as to avoid accidents.

If you are interested in our products, please contact us! . .