Everywhere in the construction of Expressway and high-speed railway, brings a lot of material specifications demand, so the whole crusher equipment market is a very good use. But not all are suitable for crushing equipment?

Of course not, highway engineering projects are often specified by the crusher to processing stone, which is a reason. Impact crusher processed stone is to use other processing out equipment better, which is the most suitable for stone production equipment in.

The machine has the following advantages of impact crusher:

First, impact crusher has the advantages of simple structure, small volume, light weight, high efficiency;

Second, feed port, can be used for crushing materials with larger;

Third, because the plate hammer impact, and the impact plate multi angle counter, and a plurality of crushing cavity, so the stone shaping ability is very strong, out of the stone showed a cube;

Fourth, simple maintenance, replacement time is very fast.

Strike back type crushing machine is an important equipment of stone production line, is one of many in a good shaping machine. We want to ensure its stable operation, must know some impact broken simple troubleshooting knowledge and daily maintenance knowledge:

1, such as the discovery of impact crusher important part maintaining bearing fever how to do?

This may be due to lack of oil caused by the bearing, so what we should do is to timely refueling. Of course, too much fuel will also make bearing heating, must check the oil level when refueling. Bearing damage should be promptly replace bearings. The upper cover tight to adjust bolt, adhere to the principle of moderate elasticity is appropriate.

2, such as the discovery of impact crusher advantage over hammer crusher vibration anomaly when how should do?

impact crusher vibration anomaly that material is too large, we can check the feed size. Uneven wear that counterattack hammer head needs to be replaced, the imbalance of the rotor to adjust, improper to check the anchor bolts and the reinforcement treatment of foundation.

3, such as the discovery of crusher belt turnover do?

This shows that the belt was worn, it will need to be replaced because of triangular belt, belt transport equipment problems, need to be adjusted in the belt pulley on the same plane, attention must be paid to the quality of triangle belt itself.

4, such as the discovery of crusher discharging oversized do?

This shows that the hammer wear, need to be adjusted or replaced the hammer of leisure. There is a situation in which the feed oversized will also affect the grain size, adjust the gap between the hammer and impact plate, general adjustment can 15-20mm.