An common task is to connect another SATA disk to the system. When you're used on running Linux, you will find it logic that Linux just sees the disk, and you can fdisk it right away. Solaris is just another story.
[@more@]To let solaris know a new disk is added I run the cmd :
devfsadm -vC
It scans the system and will add and remove new and old devices. When the cmd completes, time for another cmd :
format
This cmd let you choose a disk to format, and create an Solaris label on the disk. After creating the label, have fun by slicing the disk. (It's a killer :-) Preparing an disk is done like :
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c2d0
/pci@0,0/pci-ide@8/ide@1/cmdk@0,0
1. c3d0
/pci@0,0/pci-ide@7/ide@0/cmdk@0,0
Specify disk (enter its number): 1
selecting c3d0
Controller working list found
[disk formatted, defect list found]
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
show - translate a disk address
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
volname - set 8-character volume name
!
quit
format> fdisk
No fdisk table exists. The default partition for the disk is:
a 100% "SOLARIS System" partition
Type "y" to accept the default partition, otherwise type "n" to edit the
partition table.
y
format> lABEL
`lABEL' is not expected.
format> label
Ready to label disk, continue? y
format> verify
Warning: Primary label on disk appears to be different from
current label.
Warning: Check the current partitioning and 'label' the disk or use the
'backup' command.
Primary label contents:
Volume name = < >
ascii name =
pcyl = 30400
ncyl = 30398
acyl = 2
bcyl = 0
nhead = 255
nsect = 63
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 30397 232.86GB (30398/0/0) 488343870
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 alternates wm 1 - 2 15.69MB (2/0/0) 32130
format> par
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!
quit
partition> mod
Select partitioning base:
0. Current partition table (original)
1. All Free Hog
Choose base (enter number) [0]? 1
Part Tag Flag Cylinders Size Blocks
0 root wm 0 0 (0/0/0) 0
1 swap wu 0 0 (0/0/0) 0
2 backup wu 0 - 30397 232.86GB (30398/0/0) 488343870
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 usr wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 alternates wm 1 - 2 15.69MB (2/0/0) 32130
Do you wish to continue creating a new partition
table based on above table[yes]?
Free Hog partition[6]?
Enter size of partition '0' [0b, 0c, 0.00mb, 0.00gb]:
Enter size of partition '1' [0b, 0c, 0.00mb, 0.00gb]:
Enter size of partition '3' [0b, 0c, 0.00mb, 0.00gb]:
Enter size of partition '4' [0b, 0c, 0.00mb, 0.00gb]:
Enter size of partition '5' [0b, 0c, 0.00mb, 0.00gb]:
Enter size of partition '7' [0b, 0c, 0.00mb, 0.00gb]:
Part Tag Flag Cylinders Size Blocks
0 root wm 0 0 (0/0/0) 0
1 swap wu 0 0 (0/0/0) 0
2 backup wu 0 - 30397 232.86GB (30398/0/0) 488343870
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 usr wm 3 - 30397 232.84GB (30395/0/0) 488295675
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 alternates wm 1 - 2 15.69MB (2/0/0) 32130
Okay to make this the current partition table[yes]?
Enter table name (remember quotes): "datadsk"
Ready to label disk, continue? y
partition> q
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
show - translate a disk address
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
volname - set 8-character volume name
!
quit
format> save
Saving new disk and partition definitions
Enter file name["./format.dat"]:
format> verify
Warning: Primary label on disk appears to be different from
current label.
Warning: Check the current partitioning and 'label' the disk or use the
'backup' command.
Primary label contents:
Volume name = < >
ascii name =
pcyl = 30400
ncyl = 30398
acyl = 2
bcyl = 0
nhead = 255
nsect = 63
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 30397 232.86GB (30398/0/0) 488343870
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 3 - 30397 232.84GB (30395/0/0) 488295675
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 alternates wm 1 - 2 15.69MB (2/0/0) 32130
format> q
Two more steps to go, first a filesystem is needed, and after that the disk must be mounted. Creating an filesystem is easy :
# newfs /dev/dsk/c3d0s6
newfs: construct a new file system /dev/rdsk/c3d0s6: (y/n)? y
Warning: 4870 sector(s) in last cylinder unallocated
/dev/rdsk/c3d0s6: 488295674 sectors in 79476 cylinders of 48 tracks, 128 sectors
238425.6MB in 4968 cyl groups (16 c/g, 48.00MB/g, 5824 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 98464, 196896, 295328, 393760, 492192, 590624, 689056, 787488, 885920,
Initializing cylinder groups:
...............................................................................
....................
super-block backups for last 10 cylinder groups at:
487395104, 487493536, 487591968, 487690400, 487788832, 487887264, 487985696,
488084128, 488182560, 488280992
And mounting the disk :
# mount /dev/dsk/c3d0s6 /mnt
# df -h /mnt/
Filesystem size used avail capacity Mounted on
/dev/dsk/c3d0s6 229G 64M 227G 1% /mnt
Well that whas easy, wasn't it ?
来自 “ ITPUB博客 ” ,链接:https://blog.itpub.net/271283/viewspace-1026166/ ,如需转载,请注明出处,否则将追究法律责任。