ITPub博客

首页 > 数据库 > Oracle > 10g RAC: How to Clean Up After a Failed CRS Install

10g RAC: How to Clean Up After a Failed CRS Install

原创 Oracle 作者:zhulch 时间:2007-10-15 13:15:36 0 删除 编辑
...........[@more@]PURPOSE
-------

The purpose of this document is to help DBA's and support analysts understand how
to clean up a failed CRS (Cluster Ready Services) install for 10g RAC.


SCOPE & APPLICATION
-------------------

DBA's and Support Analysts


10g RAC: How to Clean Up After a Failed CRS Install
---------------------------------------------------

Not cleaning up a failed CRS install can cause problems like node reboots.
Follow these steps to clean up a failed CRS install:

1. Run the rootdelete.sh script then the rootdeinstall.sh script from the
$ORA_CRS_HOME/install directory. Running these scripts should be sufficent
to clean up your CRS install. If you have any problems with these scripts
please open a service request.

If for some reason you have to manually remove the install due to problems
with the scripts, continue to step 2:

2. Stop the Nodeapps on all nodes:

srvctl stop nodeapps -n

3. Prevent CRS from starting when the node boots. To do this issue the following
as root:

Sun:

rm /etc/init.d/init.cssd
rm /etc/init.d/init.crs
rm /etc/init.d/init.crsd
rm /etc/init.d/init.evmd
rm /etc/rc3.d/K96init.crs
rm /etc/rc3.d/S96init.crs
rm -Rf /var/opt/oracle/scls_scr
rm -Rf /var/opt/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab

Linux:

rm -f /etc/init.d/init.cssd
rm -f /etc/init.d/init.crs
rm -f /etc/init.d/init.crsd
rm -f /etc/init.d/init.evmd
rm -f /etc/rc2.d/K96init.crs
rm -f /etc/rc2.d/S96init.crs
rm -f /etc/rc3.d/K96init.crs
rm -f /etc/rc3.d/S96init.crs
rm -f /etc/rc5.d/K96init.crs
rm -f /etc/rc5.d/S96init.crs
rm -Rf /etc/oracle/scls_scr
rm -f /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab

HP-UX:

rm /sbin/init.d/init.cssd
rm /sbin/init.d/init.crs
rm /sbin/init.d/init.crsd
rm /sbin/init.d/init.evmd
rm /sbin/rc2.d/K960init.crs
rm /sbin/rc2.d/K001init.crs
rm /sbin/rc3.d/K960init.crs
rm /sbin/rc3.d/S960init.crs
rm -Rf /var/opt/oracle/scls_scr
rm -Rf /var/opt/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab

HP Tru64:

rm /sbin/init.d/init.cssd
rm /sbin/init.d/init.crs
rm /sbin/init.d/init.crsd
rm /sbin/init.d/init.evmd
rm /sbin/rc3.d/K96init.crs
rm /sbin/rc3.d/S96init.crs
rm -Rf /var/opt/oracle/scls_scr
rm -Rf /var/opt/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab

IBM AIX:

rm /etc/init.cssd
rm /etc/init.crs
rm /etc/init.crsd
rm /etc/init.evmd
rm /etc/rc.d/rc2.d/K96init.crs
rm /etc/rc.d/rc2.d/S96init.crs
rm -Rf /etc/oracle/scls_scr
rm -Rf /etc/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab

4. If they are not already down, kill off EVM, CRS, and CSS processes or reboot
the node:

ps -ef | grep crs
kill
ps -ef | grep evm
kill
ps -ef | grep css
kill

Do not kill any OS processes, for example icssvr_daemon process !

5. If there is no other Oracle software running (like listeners, DB's, etc...),
you can remove the files in /var/tmp/.oracle or /tmp/.oracle. Example:

rm -f /var/tmp/.oracle

or

rm -f /tmp/.oracle

6. Remove the ocr.loc
Usually the ocr.loc can be found at /etc/oracle

7. De-install the CRS home in the Oracle Universal Installer

8. Remove the CRS install location:

rm -Rf /*

9. Clean out the OCR and Voting Files with dd commands. Example:

dd if=/dev/zero of=/dev/rdsk/V1064_vote_01_20m.dbf bs=8192 count=2560
dd if=/dev/zero of=/dev/rdsk/ocrV1064_100m.ora bs=8192 count=12800

If you placed the OCR and voting disk on a shared filesystem, remove them.

If you are removing the RDBMS installation, also clean out any ASM disks if
they have already been used.

10.If you would like to re-install CRS, follow the steps in the RAC Installation manual.

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/7318139/viewspace-976717/,如需转载,请注明出处,否则将追究法律责任。

请登录后发表评论 登录
全部评论
  • 博文量
    554
  • 访问量
    2249628