ITPub博客

首页 > Linux操作系统 > Linux操作系统 > 安装配置ETCD

安装配置ETCD

原创 Linux操作系统 作者:zchbaby2000 时间:2020-05-05 10:32:11 0 删除 编辑

Master: 192.168.56.101
Worker node1: 192.168.56.102
Worker node2: 192.168.56.103

在安装k8s之前,手动安装配置etcd


下载etcd


传到3节点,解压压缩包
mkdir /opt/etcd/{bin,cfg,ssl} -p
tar -zxvf etcd-v3.2.30-linux-amd64.tar.gz -C ./
mv etcd-v3.2.30-linux-amd64/{etcd,etcdctl} /opt/etcd/bin/


master节点配置文件 /opt/etcd/cfg/etcd
#[Member]
ETCD_NAME="etcd-1"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.56.101:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.56.101:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.56.101:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.56.101:2379"
ETCD_INITIAL_CLUSTER="etcd-1=https://192.168.56.101:2380,etcd-2=https://192.168.56.102:2380,etcd-3=https://192.168.56.103:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"


Worker node1节点配置文件 /opt/etcd/cfg/etcd
#[Member]
ETCD_NAME="etcd-2"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.56.102:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.56.102:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.56.102:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.56.102:2379"
ETCD_INITIAL_CLUSTER="etcd-1=https://192.168.56.101:2380,etcd-2=https://192.168.56.102:2380,etcd-3=https://192.168.56.103:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"


Worker node2节点配置文件 /opt/etcd/cfg/etcd
#[Member]
ETCD_NAME="etcd-3"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.56.103:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.56.103:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.56.103:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.56.103:2379"
ETCD_INITIAL_CLUSTER="etcd-1=https://192.168.56.101:2380,etcd-2=https://192.168.56.102:2380,etcd-3=https://192.168.56.103:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"


master节点,Worker node1, Worker node2 配置文件 /usr/lib/systemd/system/etcd.service

[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/opt/etcd/cfg/etcd
ExecStart=/opt/etcd/bin/etcd \
--name=${ETCD_NAME} \
--data-dir=${ETCD_DATA_DIR} \
--listen-peer-urls=${ETCD_LISTEN_PEER_URLS} \
--listen-client-urls=${ETCD_LISTEN_CLIENT_URLS}, \
--advertise-client-urls=${ETCD_ADVERTISE_CLIENT_URLS} \
--initial-advertise-peer-urls=${ETCD_INITIAL_ADVERTISE_PEER_URLS} \
--initial-cluster=${ETCD_INITIAL_CLUSTER} \
--initial-cluster-token=${ETCD_INITIAL_CLUSTER_TOKEN} \
--initial-cluster-state=new \
--cert-file=/opt/etcd/ssl/server.pem \
--key-file=/opt/etcd/ssl/server-key.pem \
--peer-cert-file=/opt/etcd/ssl/server.pem \
--peer-key-file=/opt/etcd/ssl/server-key.pem \
--trusted-ca-file=/opt/etcd/ssl/ca.pem \
--peer-trusted-ca-file=/opt/etcd/ssl/ca.pem
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target


将之前生成的证书拷贝到/opt/etcd/ssl
cp ca*pem server*pem /opt/etcd/ssl


启动并设置开机启动
systemctl start etcd
systemctl enable etcd

检查一下集群的状态
/opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.56.101:2379,https://192.168.56.102:2379,https://192.168.56.103:2379" cluster-health
member 181ffe2d394f445b is healthy: got healthy result from https://192.168.56.101:2379
member 737ab8edec59b6e6 is healthy: got healthy result from https://192.168.56.102:2379
member 87a3a196a794e8f0 is healthy: got healthy result from https://192.168.56.103:2379
cluster is healthy

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/725820/viewspace-2689897/,如需转载,请注明出处,否则将追究法律责任。

上一篇: 在Linux上安装gskit
请登录后发表评论 登录
全部评论
喜欢各种数据库相关的开发,架构设计,运维和性能优化
  • 博文量
    244
  • 访问量
    92798