Oracle不支持使用交叉线作为ClusterWare的内部连接， 这里的Not Support不是说交叉线不能用，而是说Oracle不建议这样做。
CROSS OVER CABLES ARE NOT SUPPORTED.
The requirement is to use a switch:
1) cross-cabling limits the expansion of RAC to two nodes
2) cross-cabling is unstable:
a) Some NIC cards do not work properly with it. They are not able to negotiate the DTE/DCE clocking, and will thus not function.
These NICS were made cheaper by assuming that the switch was going to have the clock. Unfortunately there is no way to know which NICs do not have that clock.
b) Media sense behaviour on various OS's (most notably Windows) will bring a NIC down when a cable is disconnected.
Either of these issues can lead to cluster instability and lead to ORA-29740 errors (node evictions).
Due to the benefits and stability provided by a switch, and their afforability ($200 for a simple 16 port GigE switch), and the expense and time related to dealing with issues when one does not exist, this is the only supported configuration.
来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/35489/viewspace-614691/，如需转载，请注明出处，否则将追究法律责任。