首页 > Linux操作系统 > Linux操作系统 > REHL8.2断电导致 generating /run/initramfs/rdsosreport.txt 问题

REHL8.2断电导致 generating /run/initramfs/rdsosreport.txt 问题

原创 Linux操作系统 作者:Davis_itpub 时间:2020-11-23 15:15:22 0 删除 编辑

REHL8.2 断电导致 generating /run/initramfs/rdsosreport.txt 问题


generating “/run/initramfs/rdsosreport.txt”
entering emergencymode. exit the shell to continue
type “journalctl” to view system logs.
you might want to save “/run/initramfs/rdsosreport.txt” to a usb stick or /boot after mounting them and attach it to a bug report。


xfs_repair /dev/mapper/centos-root -L



If you're attempting to run  , getting the error message that suggests mounting the filesystem to replay the log, and after mounting still receiving the same error message, you may need to perform a forced repair (using the  -L flag with  xfs_repair).  This option should be a last resort.

For example, I'll use a case where I had a corrupt root partition on my CentOS 7 install. When attempting to mount the partition, I continually received the below error message:

mount: mount /dev/mapper/centos-root on /mnt/centos-root failed: Structure needs cleaning

Unfortunately, forcing a repair would involve zeroing out (destroying) the log before attempting a repair. When using this method, there is a potential of ending up with more corrupt data than initially anticipated; however, we can use the appropriate xfs tools to see what kind of damage may be caused before making any permanent changes.

Using   and  , you can create a metadata image of the affected partition and perform the forced repair on the image rather than the partition itself. The benefits of this is the ability to see the damage that comes with a forced repair before performing it on the partition.

To do this, you'll need a decent sized USB or external hard drive. Start by mounting the USB drive - my USB was located at  /dev/sdb1, yours may be named differently.

mkdir -p /mnt/usbmount /dev/sdb1 /mnt/usb

Once mounted, run  xfs_metadump to create a copy of the partition metadata to the USB - again, your affected partition may be different. In this case, I had a corrupt root partition located at  /dev/mapper/centos-root:

xfs_metadump /dev/mapper/centos-root /mnt/usb/centos-root.metadump

Next, you'll want to restore the metadata in to an image so that we can perform a repair and measure the damage.

xfs_mdrestore /mnt/usb/centos-root.metadump /mnt/usb/centos-root.img

I found that in rescue mode  xfs_mdrestore is not available, and instead you'll need to be in rescue mode of a live CentOS CD.

Finally, we can perform the repair on the image:

xfs_repair -L /mnt/usb/centos-root.img

After the repair has completed and you've assessed the output and potential damage, you can determine as to whether you'd like to perform the repair against the partition.

To run the repair against the partition, simply run:

xfs_repair -L /dev/mapper/centos-root

Don't forget to check the other partitions for corruption as well. After the repairs, reboot the system and you should be able to successfully boot.

Remember that the  -L flag should be used as a last resort where there are no other possible options to repair.








fsck -vcfy /dev/sda3 会清空数据。


# xfs_repair /dev/sdb1 /*后面跟目标驱动器路径*/如果提示log什么的有问题,则使用-L参数,这会重建log,然后再使用上面一条命令进行修复。
#xfs_repair -L /dev/sdb1


1 执行debugfs -w /dev/sdb    (/dev/sdb出现 该情况文件所在的分区) -w says that partition will be opened in read-write mode.

2 mount /dev/sdb /mnt/other  挂载到mnt/other 目录下

3 执行 clri path/file    移除损坏文件节点 注意path/file 值的是相对路径 而不是/mnt/other/****

4 退出 debugfs 执行fsck -y /mnt/other   修复该分区



ext4文件系统,使用命令  fsck.ext4 /dev/md0 修复,

如果是xfs文件系统,使用命令 xfs_repair -L /dev/md0修复,



# mount /dev/sdb1 /disk2
mount: Structure needs cleaning

我用了下列的指令解決了. 雖然我不太清楚什麼東西導致它有問題 :
# xfs_repair -n /dev/sdb1


# xfs_check /dev/sdb1
ERROR: The filesystem has valuable metadata changes in a log which needs to
be replayed. Mount the filesystem to replay the log, and unmount it before
re-running xfs_check. If you are unable to mount the filesystem, then use
the xfs_repair -L option to destroy the log and attempt a repair.
Note that destroying the log may cause corruption — please attempt a mount
of the filesystem before doing this.

用 xfs_check 指令. 它建議我用 “xfs_repair -L ”
# xfs_repair -L /dev/sdb1

這樣弄玩之後. 在用 xfs_check 檢查一次
# xfs_check /dev/sdb1

# mount /dev/sdb1 /disk2

来自 “ ITPUB博客 ” ,链接:,如需转载,请注明出处,否则将追究法律责任。

请登录后发表评论 登录


  • 博文量
  • 访问量