Knowledge of the Machine
Combination crushers made by our company are ideally suitable for primary and secondary crushing, with low power consumption and easy maintenance. Every feature of these machines has been carefully designed to provide superior quality and performance. They are widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc. The Combination Crusher is developed by combining the pre-breakage technology of domestic and foreign countries, and optimizing the key structure parameters. These crushers are recommended by leading consultants in this field and are used by hundreds of customers all over the world.
When the Combination Crusher is working, raw materials are fed from the top of the Combination Crusher, and fall into the rotating impeller at a high speed to be crushed. As other materials simultaneously fall around the rotating impeller, the two kinds of materials join together and are crushed by each other. The materials are crushed many times in and around the impeller of the Combination Crusher, and are finally discharged from beneath the machine. Via a closed loop, controlled by screening equipment, the product achieves its required final size.
Depending on the optimized design and excellent equipment characteristics, the Combination Crusher is widely used to crush raw material such as clinker in cement factories, building sand, stone and metallurgical slag.
1. Good seal ability and stable operation
2. High crushing ration and low consumption
3. Big production capacity
4. Easy maintenance
General Idea of Cone Crusher
The machine is used to crush all kinds of ores and rocks with medium hardness or with above-medium hardness in many industries, which are metallurgy, building, road building, chemical and silicate industry. It is very suitable for intermediate crushing and fine crushing of ores and rocks. There are by and large three types of cone crusher: Symons cone crusher, Hydraulic cone crusher and Secondary cone crusher. When customers buy cone crusher, they can choose the suitable one taking the condition of the ore or rock the crusher will deal with in their mind. Cone Crusher's features of large reduction ratio, high efficiency, low energy consumption and even granularity make it popular in the mining plant.
Hydraulic cone crusher with high efficiency is suitable for primary crushing of many kinds of mining and rock whose compression strength not higher than 360Mpa, such as ore, concrete, fireproof material, calamite, quartzite, corundum, perlite, ironstone, basalt etc. Hongxing series hydraulic cone crusher is widely used in mining and construction, concrete factory, sandstone making industry.
The crushing principle is finished between fixed cone plate and movable cone plate. The motor drives the horizontal axis of the crusher through triangle belt and pulley, the horizontal axis drive the eccentric shaft bush to rotate through gear transmission. The eccentric shaft drives the main shaft to make the movable cone plate swing at a regulated track from time to time, the materials are crushed due to constant pressed and crooked in the crushing cavity. The finished products are discharged from the discharging opening
1) Trustworthy insurance system: The spring insurance system applied in this machine can adjust the size of discharge opening to make sure that crusher works safely.
2) Adjustable crushing chamber: The shape of crushing chamber plays a very important role in the whole machine's performance. The Cone Crusher has four kinds of chamber shapes. Customers can choose the suitable one according to their specific demands.
3) Easy replacing of chamber: There is no need to fill the reverse side of crushing wall with anything when install a new crushing wall. It is fixed by bolts, which not only decreases the difficulty of replacing, but also increases the speed.
4) Simple operation: The Cone Crusher employed high-pressure resistant displacement transducer. When the operator wants to adjust the size of the discharge opening, he only need press the button on the operation board. In addition, the operator can see the changing process of the size. So, it is extremely convenient and precise.
来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/26787532/viewspace-719918/，如需转载，请注明出处，否则将追究法律责任。