ITPub博客

首页 > Linux操作系统 > Linux操作系统 > Which Kind of Crusher DO You Need

Which Kind of Crusher DO You Need

原创 Linux操作系统 作者:mychris89 时间:2012-03-30 14:29:28 0 删除 编辑

If you are still hesitating as to which kind of crusher you need most, try our crushing machines, and I am sure you will not be disappointed. Here are some illustrations for you.

Description

The jaw crusher is widely used in mining, metallurgical industry, building material, highway, railway and chemical industry. The PE series jaw

crusher is widely applied in mine, metallurgy, chemical industry, building, highway, water conservancy, light industry to crush or break various

kinds of stones with compressive of not more than 350Mpa. Based on years' experience and technology development, Hongxing jaw crusher series are

of 9 different models, which can meet most crushing requirements in primary and secondary crushing. We recently have primary jaw crusher, mobile

jaw crusher, jaw breaker, rock crusher, aggregate jaw crusher and so on.

Operation Rules

The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between

toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this

process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves

away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.

Main Features and Advantages:

1. Crushing cavity is deep without dead zone. It is easier to feed materials and yield higher output.

2. Jaw crusher is featured with high crushing ratio and sound epigranularity.

3. The gasket type adjusting device of the discharge gate is characterized by reliable performance, convenient use, large adjusting range, and

improves the equipment flexibility.

4. The lubricating system is safe and reliable. It makes it easier to replace components and requires little maintenance.

5. Jaw crusher features simple structure, reliable performance and low operating cost.

6. It is highly energy saving. A single machine saves 15%~30% of energy consumed and the system can save over half the energy consumed.

7. To meet different client needs, the discharge gate is designed with a large adjusting range.

8. Jaw crusher causes low noise and creates little dust.

About Hammer Crusher

The hammer crusher is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as

limestone coal and other used in metallurgy, building material, chemical and water-power industry, with a feature of big crushing ratio and even

product graininess. It is also named hammer mill, and crushes materials by the collision between the high-speed hammer and materials. It possesses

qualities of simple structure, large reduction ratio, and high-efficiency. This hammer crusher is applicable for both dry and wet crushing. The

compression strength of the materials shall not exceed 100MPa, while the moisture content shall be lower than 15%.

Working Rules

The hammer mill crushes by the collisions between high-speed hammer and material, and the hammer crusher (hammer mill) features are in its simple

structure, high reduction ration, high efficiency, etc. The PC hammer crusher (hammer mill) were developed for both dry and wet crushing of

brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical

industries.

Hammer Crusher can be used to crush the materials, replying on the impact force. The materials entered into the hammer crusher can be crushed when

meeting the impact force of the high-speed rotating hammer .Under the kinetic energy effect from the hammer, the finished materials rush in high

speed towards baffle and sieve .At the same time, the materials strike each other .Then after times of crushing,the materials which granularity

is less than the sieve gap can be discharged. However, the bigger ones will experience another times of impacting, grinding, and squeezing. The

final product size of the hammer crusher can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can

also be adjusted according to different requirement.

Features and Benefits

1. Simple structure, large crushing ratio, high –efficiency

2. Can be changed the discharging granularity by adjusting the gap.

3. Wear resisting and anti-impacting hammer, easy usage and convenient maintenance.

The jaw crusher is widely used in mining, metallurgical industry, building material, highway, railway and chemical industry. The PE series jaw

crusher is widely applied in mine, metallurgy, chemical industry, building, highway, water conservancy, light industry to crush or break various

kinds of stones with compressive of not more than 350Mpa. Based on years' experience and technology development, Hongxing jaw crusher series are

of 9 different models, which can meet most crushing requirements in primary and secondary crushing. We recently have primary jaw crusher, mobile

jaw crusher, jaw breaker, rock crusher, aggregate jaw crusher and so on.

Operation Rules

The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between

toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this

process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves

away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.

Main Features and Advantages:

1. Crushing cavity is deep without dead zone. It is easier to feed materials and yield higher output.

2. Jaw crusher is featured with high crushing ratio and sound epigranularity.

3. The gasket type adjusting device of the discharge gate is characterized by reliable performance, convenient use, large adjusting range, and

improves the equipment flexibility.

4. The lubricating system is safe and reliable. It makes it easier to replace components and requires little maintenance.

5. Jaw crusher features simple structure, reliable performance and low operating cost.

6. It is highly energy saving. A single machine saves 15%~30% of energy consumed and the system can save over half the energy consumed.

7. To meet different client needs, the discharge gate is designed with a large adjusting range.

8. Jaw crusher causes low noise and creates little dust.

About Hammer Crusher

The hammer crusher is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as

limestone coal and other used in metallurgy, building material, chemical and water-power industry, with a feature of big crushing ratio and even

product graininess. It is also named hammer mill, and crushes materials by the collision between the high-speed hammer and materials. It possesses

qualities of simple structure, large reduction ratio, and high-efficiency. This hammer crusher is applicable for both dry and wet crushing. The

compression strength of the materials shall not exceed 100MPa, while the moisture content shall be lower than 15%.

Working Rules

The hammer mill crushes by the collisions between high-speed hammer and material, and the hammer crusher (hammer mill) features are in its simple

structure, high reduction ration, high efficiency, etc. The PC hammer crusher (hammer mill) were developed for both dry and wet crushing of

brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical

industries.

Hammer Crusher can be used to crush the materials, replying on the impact force. The materials entered into the hammer crusher can be crushed when

meeting the impact force of the high-speed rotating hammer .Under the kinetic energy effect from the hammer, the finished materials rush in high

speed towards baffle and sieve .At the same time, the materials strike each other .Then after times of crushing,the materials which granularity

is less than the sieve gap can be discharged. However, the bigger ones will experience another times of impacting, grinding, and squeezing. The

final product size of the hammer crusher can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can

also be adjusted according to different requirement.

Features and Benefits

1. Simple structure, large crushing ratio, high –efficiency

2. Can be changed the discharging granularity by adjusting the gap.

3. Wear resisting and anti-impacting hammer, easy usage and convenient maintenance.

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/26787532/viewspace-719916/,如需转载,请注明出处,否则将追究法律责任。

请登录后发表评论 登录
全部评论

注册时间:2012-03-14

  • 博文量
    68
  • 访问量
    32796