ITPub博客

首页 > Linux操作系统 > Linux操作系统 > DL140G3’在安装‘RHEL 4U4-64’的时候不能引导起来 C- 系统 在DL140G3上安装RHEL 4U4-64时的kernel panic

DL140G3’在安装‘RHEL 4U4-64’的时候不能引导起来 C- 系统 在DL140G3上安装RHEL 4U4-64时的kernel panic

原创 Linux操作系统 作者:pinong 时间:2007-11-26 11:42:57 0 删除 编辑
解决方法:

BIOS->Advanced->8042 emulation support 设成disable
link: http://h18013.www1.hp.com/products/servers/management/rdp/knowledgebase/00000124.html
How To Deploy An Operating System To A ProLiant DL140, DL140 G2, DL140 G3, DL145, DL145 G2, And DL145 G3 Server





Article: 124

Applies to: Release 1.50 or greater

To capture an image using PXE:

1. On the target server, access ROM-Based Setup Utility (RBSU) and set the NIC first in the boot order via the BIOS.
2. On the Deployment Server, use the Read Image job from the Server Deployment Toolbox > 2A - OS Installation (Imaged) folder.

To deploy an image using PXE:

1. On the target server, access RBSU and set the NIC first in the boot order via the BIOS.
Additionally for Windows deployments to a DL145 G3, set Advanced > Serial ATA to PATA, or for Linux deployments, set to SATA.
For Red Hat Enterprise Linux 4 for AMD64 and Intel EM64T or SUSE Linux Enterprise Server 10 for AMD64 and Intel EM64T deployments to a DL140 G3, disable Advanced > 8042 Emulation Support. For all other operating systems, enable 8042 Emulation Support.
2. Manually configure the hardware.
3. On the Deployment Server, use the Write Image job from the Server Deployment Toolbox > 2A - OS Installation (Imaged) folder.

For Releases 1.xx and 2.xx, if using a Bootworks boot diskette in place of PXE, the NIC driver to choose for the ProLiant 100 series servers is the Broadcom NetXtreme Gigabit Ethernet (B57.dos) driver.

IMPORTANT: ProLiant Support Pack does not support ProLiant 100 series servers. If the Linux ProLiant Support Pack is installed, then the Altiris Deployment Agent for Linux (adlagent) may hang when it tries to shutdown the production operating system to begin the job.

[@more@]

Loading vmlinuz-rhel-4-u4-64...............................
Loading initrd-rhel-4-u4-64.img....................................................................
Ready.
Bootdata ok (command line is ip=10.2.12.188:10.2.12.1:10.2.12.1:255.255.255.0 BOOTIF=01-00-1c-c4-3c-ec-8a initrd=initrd-rhel-4-u4-64.img kssendmac ks=http://x.x.x.x/broom/getks.php?r=4-u4-64 ksdevice=bootif ramdisk_size=64768 console=ttyS0 BOOT_IMAGE=vmlinuz-rhel-4-u4-64 )

Linux version 2.6.9-42.EL (bhcompile@ls20-bc1-13.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-2)) #1 Wed Jul 12 23:15:20 EDT 2006

BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff10000 (usable)
BIOS-e820: 00000000cff10000 - 00000000cff21000 (ACPI data)
BIOS-e820: 00000000cff21000 - 00000000cff80000 (ACPI NVS)
BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
No mptable found.
DMI present.
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
Processor #4 6:15 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
Processor #5 6:15 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
Processor #2 6:15 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
Processor #6 6:15 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
Processor #3 6:15 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 6:15 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
Setting APIC routing to flat
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Checking aperture...
Built 1 zonelists
Kernel command line: ip=10.2.12.188:10.2.12.1:10.2.12.1:255.255.255.0 BOOTIF=01-00-1c-c4-3c-ec-8a initrd=initrd-rhel-4-u4-64.img kssendmac ks=http://x.x.x.x/broom/getks.php?r=4-u4-64 ksdevice=bootif ramdisk_size=64768 console=ttyS0 BOOT_IMAGE=vmlinuz-rhel-4-u4-64

Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 1595.995 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Placing software IO TLB between 0x5f0b000 - 0x9f0b000
Memory: 4036924k/4980736k available (2427k kernel code, 155700k reserved, 1323k data, 168k init)
Calibrating delay using timer specific routine.. 3195.65 BogoMIPS (lpj=1597828)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz stepping 07
Using IO APIC NMI watchdog
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
Detected 16.624 MHz APIC timer.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 *5 6 7 10 11 14 15)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI interrupt 0000:00:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 177
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:16:00.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI interrupt 0000:17:00.0[A] -> GSI 17 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:18:02.0[A] -> GSI 17 (level, low) -> IRQ 193
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Simple Boot Flag at 0x39 set to 0x1
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1195727491.453:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 932641B92433EA6E
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
NMI Watchdog detected LOCKUP, CPU=0, registers:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.9-42.EL
RIP: 0010:[29c>] 29c>{i8042_command+316}
RSP: 0000:00000100cfa13ec8 EFLAGS: 00000002
RAX: 0000000000013414 RBX: 0000000000001293 RCX: 00000000526993ac
RDX: 0000000000000031 RSI: 00000000000011d3 RDI: 0000000000013498
RBP: 00000000000011d3 R08: ffffffff804b6a68 R09: 0000000000000000
R10: 0000010009f73c10 R11: ffffffff80386658 R12: 0000000000000000
R13: 00000100cfa13f07 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff80544d00(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000000101000 CR4: 00000000000006e0
Process swapper (pid: 1, threadinfo 00000100cfa12000, task 00000100cfa11110)
Stack: 0000000000000246 ffffffff805729b0 0000000000000000 0000000000000000
0000000000000000 ffffffff8056397c ffffffff805729a8 5affffff805729a8
ffffffff805729b0 0000000000000000
Call Trace:8056397c>{i8042_init+339} 8010c524>{init+336}
{child_rip+8} 8010c3d4>{init+0}
801115c3>{child_rip+0}

Code: a8 01 75 08 81 fb 0f 27 00 00 7e e6 83 c8 ff 81 fb 10 27 00
Kernel panic - not syncing: nmi watchdog
Badness in panic at kernel/panic.c:118

Call Trace:{panic+522} 80111f46>{show_stack+173}
8011202f>{show_registers+214} {die_nmi+74}
{nmi_watchdog_tick+139} {notifier_call_chain+31}
80112c84>{default_do_nmi+112} {do_nmi+56}
801117f7>{paranoid_exit+0} {__delay+9}
8013a4c3>{__call_console_drivers+68}
8013ac8a>{vprintk+873} {strncpy+11}
{kallsyms_lookup+198} {kallsyms_lookup+198}
{printk+141} 801532f3>{__kernel_text_address+26}
{show_trace+303} 80111f57>{dump_stack+9}
{panic+522} 80111f46>{show_stack+173}
8011202f>{show_registers+214} {die_nmi+74}
{nmi_watchdog_tick+139} {notifier_call_chain+31}
80112c84>{default_do_nmi+112} {do_nmi+56}
801117f7>{paranoid_exit+0} {serial_in+83}

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/20102458/viewspace-984936/,如需转载,请注明出处,否则将追究法律责任。

下一篇: 没有了~
请登录后发表评论 登录
全部评论
  • 博文量
    2
  • 访问量
    6797