首页 > Linux操作系统 > Linux操作系统 > How to install Ubuntu Linux from USB Stick

How to install Ubuntu Linux from USB Stick

原创 Linux操作系统 作者:DennisLan 时间:2009-05-27 10:48:58 0 删除 编辑
April 16, 2008 · General · Email This Post

If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!

This tutorial describes how to install Ubuntu by copying the contents of the installation CD to an USB memory stick (aka flash drive) and making the stick bootable. This is handy for machines like ultra portable notebooks that do not have a CD drive but can boot from USB media.

In short here’s what you do:

Prepare the USB flash drive

Boot the computer from your USB flash drive.

Install Ubuntu as you would from a normal boot CD


A running Ubuntu 8.04 or any ubuntu version installation

A USB device (stick, pen-drive, USB hard disk) that has already been formatted with FAT32 and has enough free space to hold your Ubuntu installation image

A Ubuntu CD image downloaded from the Ubuntu servers or mirrors (*.iso file) or from here
Step 1

On the root directory of your USB device, create a folder “install”
Copy the installer kernel and the initramdisk into this folder (Download source below.You need the files “vmlinux” and “initrd.gz”).

Download source for the installer kernel and initramdisk

For AMD64 Download from here
For i386 Download from here

You need to download the files “vmlinux” and “initrd.gz”.

Step 2

Note: You need to have the installer that fits the architecture of your Ubuntu version you want to install. In other words, you need a amd64 installer if you want to install an amd64 Ubuntu .iso image and the i386 installer for an i386 iso.

Step 3

From the installation iso image you downloaded, copy the folder “isolinux” to the root directory of your USB device (right-click on the .iso file, choose “extract here”). Rename “isolinux” into “syslinux”. Go inside the directroy “syslinux”. There, rename the file “isolinux.cfg” into “syslinux.cfg”.

Step 4

Make the stick bootable: Use fdisk to set the boot flag,

Install syslinux using the following command

sudo aptitude install syslinux

Now use syslinux to install a boot sector on your USB device

sudo syslinux /dev/sdbX

where sdbX is the device name and number of your USB device, check with “sudo mount”. A file called “ldlinux.sys” will be created in the root direcotry of the USB device.

Step 5

Copy the Ubuntu CD image in the root directory of your USB device (Contents of USB you can see as follows).If you are using i386 you need to copy the complete .iso image in to the root directory of your USB device.

来自 “ ITPUB博客 ” ,链接:,如需转载,请注明出处,否则将追究法律责任。

下一篇: 没有了~
请登录后发表评论 登录


  • 博文量
  • 访问量