ITPub博客

首页 > Linux操作系统 > Linux操作系统 > 电信合勤路由设置(转)

电信合勤路由设置(转)

原创 Linux操作系统 作者:jcszjswkzhou 时间:2019-02-01 15:06:04 0 删除 编辑
Copyright (c) 1994 - 2000 ZyXEL Communications Corp.

Prestige 642R-11 Main Menu

Getting Started Advanced Management
1. General Setup 21. Filter Set Configuration
3. Ethernet Setup 22. SNMP Configuration
4. Internet Access Setup 23. System Password
24. System Maintenance
25. IP Routing Policy Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. SUA Server Setup 99. Exit


设置Router 工作模式:

进入菜单1

Menu 1 - General Setup

System Name= hfkj
Location=huafeng
Contact Person's Name=sjz

Route IP= Yes
Route IPX= No
Bridge= No

※注意必须打开Route IP

进入菜单3.2
Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No


进入菜单4


Menu 4 - Internet Access Setup

ISP's Name= ChangeMe
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 0
VCI #= 35
Service Name=
My Login= bnn2456xxx
My Password=******
Single User Account= Yes
IP Address Assignment= Dynamic
IP Address=N/A
ENET ENCAP Gateway= N/A


进入菜单11.1

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe Route= IP
Active= Yes Bridge= No

Encapsulation=PPPoE Edit PPP Options=No
Multiplexing= LLC-based Rem IP Addr=0.0.0.0
Incoming: Edit IP/IPX/Bridge= No
Rem Login=
Rem Password=********
Outgoing: Session Options:
My Login=bnn2456xxx Edit Filter Sets= No
My Password=********* PPPoE Idle Timeout(sec)=0
Authen= CHAP/PAP PPPoE Service Name=


Step 4. 检查设备工作状态
在完成第三步以后,理论上设备应该能正常使用了。此时,可以进入菜单第24项 — System Maintenance
Menu 24 - System Maintenance

1. System Status
2. System Information and Console Port Speed
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode

然后选择第1项 — System Status,菜单如下图所示。


Menu 24.1 - System Maintenance - Status

Node-Lnk Status TxPkts RxPkts Errors Tx B/s Rx B/s Up Time
1-PPPoE Up 1042 988 0 1052 1052 0:18:21
2 N/A 0 0 0 0 0 0:00:00
3 N/A 0 0 0 0 0 0:00:00
4 N/A 0 0 0 0 0 0:00:00
5 N/A 0 0 0 0 0 0:00:00
6 N/A 0 0 0 0 0 0:00:00
7 N/A 0 0 0 0 0 0:00:00
8 N/A 0 0 0 0 0 0:00:00


Ethernet: WAN:
Status: Full Duplex Tx Pkts: 981 Line Status: Up
Collisions: 0 Rx Pkts: 1186 Upstream Speed: 832 kbps
CPU Load = 4.49% Downstream Speed: 7616 kbps


在右下角的圆圈中 Line Status:Up 代表ADSL的物理层已经连通,它下面的两项分别是ADSL所使用的上行和下行速率。
在左上角的圆圈中PPPoE代表设备所使用的封装协议为PPPoE ,Up代表协议的工作状态正常。


-------------------------
华为 Dslam:
VPI #= 0
VCI #= 35
NOKIA Dslam:
VPI #= 0
VCI #= 100

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/10294527/viewspace-123851/,如需转载,请注明出处,否则将追究法律责任。

上一篇: WinRAR密技(转)
请登录后发表评论 登录
全部评论

注册时间:2007-08-29

  • 博文量
    3488
  • 访问量
    2631697